Fiat Uno Manual
Choke control cable - removal and refittingFuel system / Choke control cable - removal and refitting
1 Remove the air cleaner.
2 Release the choke outer cable clamp and the inner cable from the swivel on the choke control lever (photo).
18.2 Choke cable at carburettor
3 The choke control is of lever type. To remove it, extract its hinge screw, accessible when the lever is pulled upwards (photo).
18.3 Extracting choke control lever screw
4 Withdraw the choke cable assembly until the inner cable can be released from the hand control lever and the choke warning lamp lead unplugged.
5 Withdraw the cable assembly through the engine compartment rear bulkhead.
6 Fit the new cable by reversing the removal operations. Before tightening the inner cable pinch screw at the carburettor, hold the choke valve plate open and pull the control lever out 2.0 or 3.0 mm, then tighten the screw. This will provide just enough free movement to ensure that when the control is pushed fully in the choke valve plate will remain fully open even with engine movement slightly stretching the cable.